Abstract
Hierarchical super-hydrophobic Ni–Co film with enhanced corrosion resistance was fabricated on a copper substrate by one-step electrodeposition process. The contact angle and water repellence properties of the Ni–Co film were measured to determine its wettability. The Ni–Co film exhibited excellent super-hydrophobic properties with a static water contact angle of 158° and a sliding angle of ≤5°. The corrosion performance of the super-hydrophobic surface (SHS) was investigated by electrochemical potentiodynamic measurements and electrochemical impedance spectroscopy in NaCl solution (3.5wt.%). Moreover, to study the long-term stability of the super-hydrophobic film, SHS samples were immersed into NaCl solution and their corrosion behaviour was investigated by the electrochemical impedance spectroscopy. Additionally, the changes of surface wettability were also monitored over the whole immersion time up to 11 days. Experimental results indicated that super-hydrophobic samples had much more corrosion resistance in comparison with freshly prepared samples or the bare substrate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
