Abstract
High strength low alloy steels have attained wide acceptance as structural materials. Research and development have led to different corrosion preventive methods. High strength low alloy (HSLA) of composition C(0.4%), Mn(0.7%), Si(0.25%). Cr(0.8%), Ni(1.7%) was selected for this study. Epoxy iron oxide, epoxy micaceous iron oxide (MIO), zinc‐rich epoxy and zinc ethyl silicate were used for painting the HSLA panels (150mm × 100mm × 3mm). Physical properties such as film thickness, specific gravity, viscosity, drying times of paints were evaluated and salt spray test, AC impedance and metallographic examination were carried out. Performance of zinc ethyl silicate coating over HSLA was found to be the best followed by epoxy micaceous iron oxide system.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
