Corrosion Behaviors in Simulated Body Fluid for TiO<sub>2</sub> Films Deposited on AZ31 Magnesium Alloys by Magnetron Sputtering

Abstract

TiO2 films were deposited on AZ31 magnesium alloy substrates by r.f. magnetron sputtering. The corrosion behaviors in simulated body fluid (SBF) of the film samples were investigated and compared to the bare AZ31 magnesium alloy. After 3 days’ corrosion in SBF, only part of the TiO2 layer suffered from corrosion and the substrate was prevented from corrosion. In contrast, the bare magnesium alloy suffered from severe corrosion. After 10 days’ corrosion, the TiO2 layer was penetrated and the substrates still did not suffer from corrosion. After 15 days’ corrosion, besides TiO2 layer, the substrate suffered from corrosion to some degree. The depth of the corrosion layer is about 6 m, which is far lower than that of bare magnesium alloy, 40 m. The results show that TiO2 films effectively improve the corrosion properties of magnesium alloys.