Abstract
This study introduces a novel Ni/NiCr/NiCrAlSi composite coating to enhance the corrosion resistance of copper, particularly for its use in marine heat exchangers. Utilizing characterization techniques such as scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS), the paper investigates the coating's composition, structure, and corrosion resistance in 3.5 wt.% NaCl aqueous solutions. A significant focus is placed on the role of aluminum within the NiCrAlSi layer, examining its influence on the coating's structure and corrosion behavior. The results indicate that the NiCrAlSi layer with an aluminum content of 5.49 at.% exhibits the most improved corrosion resistance, characterized by the highest corrosion potential and a corrosion current density that is more than one order of magnitude lower compared to the Ni/NiCr coating. The effectiveness of this composite coating is attributed to its multilayer structure and the synergistic effect of alloying elements Cr, Al, and Si, which collectively inhibit corrosive medium penetration. These insights present the Ni/NiCr/NiCrAlSi coating as a promising candidate for copper protection in sea water environments, merging enhanced durability with cost-effectiveness.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have