Abstract
MoB/CoCr, a novel material for thermal spraying, is used to resist erosion by molten Al-12.07wt.%Si alloy due to its high durability. MoB/CoCr cermet coatings were deposited by low pressure plasma spraying (LPPS), and the durability of the MoB/CoCr coating has been investigated using a molten-metal immersion tester. The microstructure of coating was characterized by XRD, SEM and EDAX. The results show that the coatings with layer structure are mainly composed of ternary borides of Co2MoB2 and CoMoB, and the coatings have excellent performance of bond strength and thermal shock resistance. After 1080h immersion test in the molten Al-12.07wt%Si, the results show that the mainly chemical composition and crystal structure were little changed, and MoB/CoCr coatings have shown excellent durability in the Al-12.07wt%Si alloy without dissolution.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
