Abstract
Complex concentrated alloys (CCAs) are new types of materials, where the equimolar rule proposed by high entropy alloys (HEAs) is modified in relation to the potential of the obtained structures. CCAs expend the compositional space of the conventional alloys, revealing new pathways for material design. The Al7Cu0.2Si0.2Zn0.2Mg0.1 alloy was prepared in an induction furnace, in controlled atmosphere and was cast in a copper ingot mold. The resulting samples of Al7Cu0.2Si0.2Zn0.2Mg0.1 were analysed by chemical, structural, and corrosion resistance. Furthermore, the alloy has been subjected to mechanical tests of hardness, elongation and tensile strength. The corrosion immersion tests were performed in 3wt% and 5wt% NaClsolution, and corrosion indices were measured periodically. The obtained corrosion film was analized by SEM-EDS to determine the composition and structural behaviour. Depending on the adhesion level, the corrosion film remained stable or partially broken and separated in the solution. The sample weight loss presented large variations between the various experimental conditions, but the general tendency was the decrease in the weight of the samples during the corrosion tests. The formation of oxide and chloride layers, during the corrosion process, determined only the dealloying in Al. Other elements remained in initial concentrations. Overall, the resistance of the alloy in saline environment seems to be promising, with significant improvement over the comparable compositions of 2000 and 7000 series aluminium alloys.
Highlights
National R&D Institute for Nonferrous and Rare Metals—IMNR, 102 Biruintei Blvd, 077145 Pantelimon, Ilfov, Romania; DENISAV22@GMAIL.COM (D.V.); mburada@imnr.ro (M.B.); o.mihai@imnr.ro (M.T.O.); beatrice.carlan@imnr.ro (B.A.S.); cristina.banica@imnr.ro (I.C.B.); ianasiei@imnr.ro (I.A.) * Correspondence: dmitrica@imnr.ro † Presented at the First Corrosion and Materials Degradation Web Conference, 17–19 May 2021; Available online: https://cmdwc2021.sciforum.net/
Complex concentrated alloys (CCAs) are new types of materials, where the equimolar rule proposed by high entropy alloys (HEAs) is modified in relation to the potential of the obtained structures
CCAs expend the compositional space of the conventional alloys, revealing new pathways for material design
Summary
Complex concentrated alloys (CCAs) are new types of materials, where the equimolar rule proposed by high entropy alloys (HEAs) is modified in relation to the potential of the obtained structures. Corrosion Behavior of Al7Cu0.2Si0.2Zn0.2Mg0.1 Complex Concentrated Alloy, in 3wt% and 5wt% Na Cl Solution † Dumitru Mitrica * , Denisa Vonica, Marian Burada , Mihai Tudor Olaru, Beatrice Adriana Serban, Ioana Cristina Badea and Ioana Anasiei
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Similar Papers
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.