Abstract
Abstract The compressive plasticity of Ti 40 Zr 25 Ni 8 Cu 9 Be 18 bulk metallic glass with different specimen aspect ratio was investigated. The specimens with aspect ratios A >1 exhibit a poor plasticity, contrariwise, showing an excellent plasticity. The maximum elongation before failure is up to about 86%. The difference in the plasticity is a result of shear bands behavior due to the geometrical constraints. The results show a linear increase in the density (spacing) of shear bands with increasing of stress, and the hardness decreases linearly with increasing of plastic strain. The results are consistent with a strain-induced local dilatation, and the free volume in the glass increases after deformation relative to the undeformed glass.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have