Abstract
Nanocomposites, produced through mechanical blending, serve to enhance thermal performance of heat exchangers, solar collectors, and photovoltaic-thermal systems. This work employs an experimental methodology to assess the thermal charging (TC) and thermal discharging (TDC) of a composite generated by mixing graphene oxide (GO) and paraffin wax. TC and TDC of the GO-reinforced paraffin wax-based phase change material (PCM) have been examined across different flow rates (0.375, 0.75, and 1.5 L/min) and concentrations of GO (ranging from 0.25 to 1.00 vol%). The results exhibit a direct correlation between TC, TDC and efficiency, and reaction parameters (flow rate and volume concentration of GO). The experimental and predicted values of TCs, TDCs, and efficiencies fell ±15% (for TC and TDC), and ±9% for thermal efficiency, demonstrating a satisfactory level of agreement. This holds a practical application and valuable predictive tool for estimating TC, TDC, and thermal efficiency on known flow rates and concentrations of GO in wax-based PCMs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
