Abstract
The refractive index profile of germanium doped preforms for optical fibers is determined by the radial distribution of germanium concentration. Knowing that there is a correlation between the germanium doping profile and the deposition surface profile of vapor-phase axial deposition (VAD) preforms, the study of this correlation has been carried out in order to estimate, indirectly, the refractive index profile of VAD preforms for optical fibers during the deposition stage. This correlation was studied through the parameterization of the preform deposition surface using two parameters: the power law index profile that best fits the preform bottom profile (/spl alpha/) and the axial distance from the bottom tip to a reference height (h). A range of values of these parameters to produce VAD preforms with standard and special doping profiles has been presented. Preforms with triangular index profile can be fabricated with /spl alpha/ and h values of about 2.0 and 5.0 mm, respectively, and preforms with parabolic index profiles can be produced with /spl alpha/ and h values of about 2.0 and 4.0 mm, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
