Abstract
The solid state interfacial reaction between gold and GaAs, was found to result in small surface microstructural changes, whereas melting of the reaction product (tentatively identified as AuGa) and subsequent solidification to form the β phase resulted in aligned rectangular protrusions with sharp corners. The rectangular protrusions were found to be much finer in scale after heating in a vacuum than after heating in argon at 1 atm. High cooling rates (e.g. 40°C min−1) during solidification resulted in the formation of both rectangular protrusions and irregularly shaped protrusions with jagged boundaries and topography. The irregular protrusions were associated with a phase tentatively identified as Au2Ga. Rapid cooling at about 600°C min−1 during solidification resulted in the formation of the gold-rich terminal solid solution (α phase) which appeared as aligned rectangular protrusions with rounded corners.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.