Correlation of structural extracellular polymeric substances in the mesh biofilms with solids retention time and biofilm hydraulic resistance in dynamic membrane bioreactors

Abstract

Dynamic membrane bioreactor (DMBR), which mainly relied on the in-situ formed biofilms on support materials with large aperture (e.g., nylon mesh) to separate fine particles in wastewater, has attracted a lot of attentions due to low cost. The filtration performance of DMBR is mainly determined by the structure and hydraulic resistance of biofilms formed on the mesh. Therefore, understanding the correlation of operation conditions with mesh biofilm compositions and permeability are critically important for optimizing DMBR operation. In present study, how structural extracellular polymeric substances, including alginate-like extracellular polysaccharide (ALE) and amyloid-like protein (AP), in mesh biofilms correlate to solids retention time (SRT) and biofilm structures was explored in DMBRs. At 5d-SRT, compact and gel-like mesh biofilms were formed with a high specific filtration resistance (SFR) of 459 × 109 m/g, while at 40d-SRT porous mesh biofilms were developed with a low SFR of 24 × 109 m/g. Consequently, the 5d-SRT MBR experienced more rapid rise in transmembrane pressure. Further studies found that the 5d-SRT mesh biofilms had a higher AP content, which was positively correlated to biofilm hydraulic resistance. On the contrary, the 40d-SRT mesh biofilms contained a higher content of ALE, suggesting that ALE was negatively correlated to biofilm hydraulic resistance. Therefore, AP instead of ALE likely played a more important role in the formation of compact and gel-like mesh biofilms.