Abstract

AbstractThis study shows for the first time, the correlation between the microstructural properties (chemical composition and its homogeneity) and the thermoelectric properties for p-type Bi0.5Sb1.5Te3 electroplated films (10-15 μm thickness). High microstructural quality of Bi0.5Sb1.5Te3 electroplated films (a close to stoichiometry chemical composition with its high homogeneity elements distribution) was achieved by using an additive in the plating solution (sodium ligninsulfonate) as a surfactant agent. A fine-grained microstructure of 280 nm to 1μm has been observed for these materials, which half that of the plated films without a surfactant. The thermoelectric properties of electrodeposited Bi0.5Sb1.5Te3 films obtained without microstructural optimisation, show modest Seebeck coefficient values of 20-120 μm/K, electrodeposited film with an optimised microstructure exhibits very high values of Seebeck coefficient of 220-300 μm/K.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.