Abstract
In order to deepen the understanding towards the creep rupture lifetime of G115 martensitic heat-resistant steel, a series of creep tests using 130–200MPa loading stresses at 923K were carried out to investigate the as-crept microstructural characteristics and cavity behaviors. The significant microstructure deformation and a dramatic increase in the areal density of high-angle grain boundaries occur when the stress loading is over 160MPa. Apart from the strain concentration at elongated grain boundaries and refined grains, the elevated stress also leads to the appearance of a strong α-fiber texture with {001}<110>//RD. The nucleation and growth of cavities can be effectively accelerated by the stress elevation, and ductile fracture is determined as the dominate mechanism within the test stresses. However, a transition towards brittle intergranular fracture is observed due to the rapid coarsening of Laves phase. Furthermore, a good prediction for creep lifetimes of G115 steel has been obtained based on the constrained diffusional cavity growth model.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.