Abstract

This paper summarizes an analysis of data obtained from an instrumented compressor of an operational, heavy duty industrial gas turbine; the goal of the aforementioned analysis is to understand some of the fundamental drivers, which may lead to compressor blade vibration. Methodologies are needed to (1) understand the fundamental drivers of compressor blade vibration, (2) quantify the severity of “events,” which accelerate the likelihood of failure and reduce the remaining life of the blade, and (3) proactively detect when these issues are occurring so that the operator can take corrective action. The motivation for this analysis lies in understanding the correlations between different sensors, which may be used to measure the fundamental drivers and blade vibrations. In this study, a variety of dynamic data was acquired from an operating engine, including acoustic pressure, bearing vibration, tip timing, and traditional gas path measurements. The acoustic pressure sensors were installed on the first four compressor stages, while the tip timing was installed on the first stage only. These data show the presence of rotating stall instabilities in the front stages of the compressor, occurring during every startup and shutdown, and manifesting itself as increased amplitude oscillations in the dynamic pressure measurements, which are manifested in blade and bearing vibrations. The data that lead to these observations were acquired during several startup and shutdown events, and clearly show that the amplitude of these instabilities and the rpm at which they occur can vary substantially.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.