Correlation among Physico-Acoustic Properties of Boscia angustifolia and Albizia adianthifolia Wood

Abstract

Abstract Underutilization of some wood species can be largely attributed to a dearth of scientific information. Therefore, identifying the acoustic characteristics of lesser used wood species such as Boscia angustifolia and Albizia adianthifolia wood is expected to encourage their use in acoustic applications. Thus, studying their acoustic properties and the relationship among these properties will help reveal their use potential for acoustic purposes and also highlight possible predictor variable(s) for other acoustic parameters in wood acoustics. This study aimed at measuring the acoustic properties of B. angustifolia and A. adianthifolia wood and investigating the correlation among these properties. Three trees of each species were felled, and a total of 270 wood samples of 20 by 20 by 300 mm3 were collected. The samples were conditioned before acoustic measurement. The longitudinal free vibration method was adopted to measure the acoustic properties. Some of the mean acoustic results obtained for B. angustifolia and A. adianthifolia wood were 835.89 Hz, 3,657.51 m/s, 0.008, 13.59 GPa, 935.39 m4 kg−1 s−1, and 807.78 Hz, 3,542.66 m/s, 0.009, 12.65 GPa, 731.75 m4 kg−1 s−1, respectively, for fundamental sound frequency (FF), velocity of sound (V), damping factor (tan δ), specific dynamic modulus of elasticity (Es), and acoustic conversion efficiency (ACE). The correlation of FF with tan δ was negatively significant (−0.59), while it was positively significant with Es and ACE (0.99 and 0.74). This study found the two wood species suitable for making frame boards only and highlights sound frequency and velocity of sound as the major predicting acoustic variables for measuring good acoustic wood.