Correlating Electrolyte Infiltration with Accessible Surface Area in Macroporous Electrodes using Neutron Radiography

Abstract

Abstract Carbon-based porous electrodes are commonly employed in electrochemical technologies as they provide a high surface area for reactions, an open structure for fluid transport, and enable compact reactor architectures. In electrochemical cells that sustain liquid electrolytes (e.g., redox flow batteries, CO2 electrolyzers, capacitive deionization), the nature of the interaction between the three phases - solid, liquid and gas - determines the accessible surface area for reactions, which fundamentally determines device performance. Thus, it is critical to understand the correlation between the electrolyte infiltration in the porous electrode and the resulting accessible surface area in realistic reactor architectures. To tackle this question, here we simultaneously perform neutron radiography with electrochemical measurements to correlate macroscopic electrode saturation/wetting with accessible surface area. We find that for untreated electrodes featuring neutral wettability with water, the electrode area remains underutilized even at elevated flow rates, both for interdigitated and parallel flow fields. Conversely, increasing the electrode hydrophilicity results in an order-of-magnitude increase in accessible surface area at comparable electrode saturation, and is less influenced by the electrolyte flow rate. Ultimately, we reveal useful correlations between reactor architectures and electrode utilization and provide a method that is broadly applicable to flow electrochemical reactors.