Correction of Light and Heavy Hydrocarbons and Their Application in a Shale Oil Reservoir in Gaoyou Sag, Subei Basin—A Case Study from Well SX84

Abstract

To accurately evaluate the shale oil resources in the Funing Formation of the Gaoyou Sag, Subei Basin, light and heavy hydrocarbon correction models of S1 were developed based on the rock pyrolysis of liquefrozen, conventional, and oil-washed shales. The improved ΔlogR technique was applied to establish the TOC, S1, and S2 logging evaluation methods. The results showed that the S2 values after oil washing were significantly lower than before. The difference between these two S2 (ΔS2) values is the heavy hydrocarbon correction amount of S1, which is about 0.69 S2. There was almost no loss of light hydrocarbons during liquefrozen shales’ pyrolysis tests; the ratio of liquefrozen to conventional S1 values is the light hydrocarbon correction factor, which is about 1.67. The corrected S1 is about 3.2 times greater than the conventional shale-tested value. The S1 and TOC are obviously “trichotomous”; a TOC greater than 1.5% and corrected S1 larger than 4.0 mg/g corresponds to the enriched resource. The logging estimated results show that the total shale oil resources in the E1f2 of the Gaoyou Sag are about 572 million tons, of which the enriched resource is about 170 million tons.