Corner Reflectors for Validation of Ice Flow Velocity Derived from SAR Images along the CHINARE-Route in Antarctica

Abstract

<p>Ice flow velocity is an important parameter for evaluating the stability of Antarctic ice shelves and analyzing the mass balance of the ice sheet. Large scale ice flow maps can be produced from satellite images with ground control and validation. Among various ground targets, corner reflectors show distinct intensity characteristics on SAR images due to its highly reflective surface shape and have been used for calibration and validation. This paper focuses on design and implementation of a set of corner reflectors to obtain the first-hand data of in-situ ice flow velocity for SAR image based ice velocity maps. The results should further help evaluate mass balance changes in East Antarctica using the input-output method.</p><p>Generally, the remote sensing method uses airborne or satellite optical and radar images from multiple periods to map ice flow velocity fields. The ground truth data are often sparse due to the harsh environment in the polar region. The annual Chinese Antarctic Research Expedition (CHINARE) makes it possible to obtain period field data of ice velocity within its campaign regions. The ~1200 km CHINARE-Route runs from Zhongshan Station to Kunlun Station along which the ice flow velocity varies from a few meters per year to 100s meters per year. 5 corner reflectors have been designed and installed along the 31st CHINARE-Route in 2015 and the 35th CHINARE-Route in 2019 (M1, M2 and M3 in the 31st CHINARE, A1and A2 in the 35th CHINARE). The ice flow velocities at the installation locations are of different orders of magnitude, about 44 m per year at the locations of M1 and A1, 93 m per year at M2 and M3 and 73 m per year at A2. The satellite orbit inclination, incident angle and the installation location were used to calculate the azimuth and elevation angles of the corner reflectors for installation. At all reflector locations GPS positions were collected at the time of installation. After that, the second time GPS coordinates of M3 in the 34th CHINARE in 2018, the third time GPS coordinates of M3, the second time GPS coordinates of A1 and A2 in the 36th CHINARE at the end of 2019 were measured respectively. TerraSAR-X was used to image the reflectors.</p><p>The results show that the mean in-situ ice flow velocity of M3 is 96.83 m per year between Feb. 2015 and Dec. 2019, with 97.51 m per year between Feb. 2015 and Jan. 2018 and 95.81m per year between Jan. 2018 and Dec. 2019. The in-situ ice flow velocity is 54.9 m per year at A1 between Jan. 2019 and Dec. 2019 and 86.92 m per year at A2 between Feb. 2019 and Dec. 2019. More TerraSAR-X and COSMO-SkyMed data will be used to extract the ice velocity corresponding to GPS measurements. The detailed information will be presented at the meeting.</p>