Abstract
Solid polymer electrolyte (SPE) is a safer alternative to use than liquid electrolytes. This research focuses on the highest conductivity with fly ash filler in solid polymer electrolyte (SPE) based on corn starch, using the solution casting method. The crystallinity and interaction between fly ash and Na+ ions of solid polymer electrolyte were seen by X-ray Diffraction (XRD), then Fourier Transform Infra-Red (FTIR), showing a shift in functional groups due to the interaction of SiO2 in fly ash and Na+ ions, and surface morphology forms was observed by Scanning Electron Microscopy (SEM). Ionic conductivity was analyzed by Electrochemical impedance Spectrometry (EIS). solid polymer electrolyte with fly ash showed the highest ionic conductivity 2,51 x 10-4 S/cm, at room temperature with addition fly ash 10%. the highest conductivity result was corresponding with amorphous peak with same concetration on XRD. SPE based on corn starch with Fly ash filler has potential to be used as a solid polymer electrolyte in supercapacitors.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
