Core Level and Valence Band XPS Spectra of E-120 Pitch-based Carbon Fiber Galvanostatically Oxidized in HNO3 Solution

Abstract

Du Pont E-120 high modulus pitch-based carbon fiber was galvanostatically oxidized in HNO3 solution and analyzed with both core level and valence band XPS. Compared to the untreated E-120 fiber, the galvanostatically oxidized fiber had a much higher oxygen content on its surface. Both surface and bulk graphitic structures were severely disordered by the electrochemical treatment as evidenced by both XPS and XRD studies. [See Y. Xie and P. M. A. Sherwood, Appl. Spectrosc. 43, 1153 (1989); Chem. Mater. 1, 427 (1989); 2, 293 (1990); Appl. Spectrosc. 44, 797 (1990); Chem. Mater. 3, 164 (1991); Appl. Spectrosc. 44, 1621, (1990); 45, 1158 (1991); Y. Xie, T. Wang, O. Franklin, and P. M. A. Sherwood, ibid. 46, 645, (1992).] However, no nitrogen was found on this pitch-based carbon fiber either before or after the treatment in HNO3 solution. Our previously reported work [Y. Xie and P. M. A Sherwood, Chem. Mater. 1, 427 (1989); 2, 293 (1990); Appl. Spectrosc. 44, 797 (1990); Chem. Mater. 3, 164 (1991); Appl. Spectrosc. 44, 1621 (1990); 45, 1158 (1991); Y. Xie, T. Wang, O. Franklin, and P. M. A. Sherwood, ibid. 46, 645 (1992)] showed that XPS valence band spectra were more sensitive to chemical environment on the carbon fiber surface than core level spectra and could be well interpreted by X–α calculations with model compounds. In this work, the valence band spectrum, together with the O 1s core level spectrum, showed that there was only one single-type oxygen containing functional group formed on the surface when the fiber was electrochemically oxidized in HNO3 solution. We also reported [see Y. Xie and P. M. A. Sherwood, Appl. Spectrosc. 45, 1158 (1991)] that the reproducibility of the galvanostatic treatment was better than that of the potentiostatic treatment, although the galvanostatic oxidation gave a very similar result to that of the potentiostatic oxidation.