Co-pyrolysis of cashew nut, coconut shells, and rice husk waste: kinetic and thermodynamic investigations

Abstract

ABSTRACT Co-pyrolysis of low ash content of coconut shell (CNS) and cashew nuts shells (CCS), and high ash content rice husk (RH) blends was performed using thermal gravimetric analysis (TGA). RH was blended with both CCS and CNS at 0, 30, 60, and 100% RH by mass. Results showed that CCS and CNS have low ash contents of 2.7 and 1.5%, respectively, while RH has high ash content of 26.7% on dry basis. TGA under nitrogen gas study was carried out at three heating rates of 10, 15, and 20 K/min. It was observed that the increase of CCS/CNS increased decomposition rates of blends. For example, RH increased from 6 to 7.7%/min when CNS was added. Furthermore, addition of low ash content leads to high decrease of maximum decomposition rates compared to high-high or low-low ash blends. Synergistic analysis has found out that a positive effect is observed when CNS/CCS is added to RH. The decrease of maximum decomposition temperature of 60–63°C compared to other studies of 10°C for all low and 40° for all high ashes is of great advantage. Flynn-Wall-Ozawa (FWO), Kissinger-Akahra-Sunose (KAS), and DAEM kinetic model analysis for 0.1 ≤ α ≤ 0.75 were used between 315 and 840°C. FWO model gave activation energy of 85, 70, and 75 kJ/mol, for RH, CNS, and CCS, respectively. Addition of low ash content biomass reduced activation energy of RH, activation energy of RH was reduced from 85 to 72 kJ/mol when CNS was added. RH requires high energy than the rest, example, RH needed 66.29 kJ/mol of energy compared to 51% of CNS and 56 kJ/mol for CCS. The entropy results were negative which implies a different orientation of molecules from origin samples properties. The Gibbs-free energies were positive and thus non-spontaneous process. Empirical models generated using SB model indicated that kinetics depends on reaction order and acceleration mechanism rather than diffusion and nuclei growth. Kinetically, the blending of high and low ash content biomass leads to high decrease of operating temperature and activation energy compared to low-low or high-high ash content blends. It has been recommended to further study on quality and quantity of product from such blends and the possibility of pre-treatment methods such as microwaves to improve pyrolysis of such blend.