Abstract
The study aimed to determine Aluminum sludge composition and structure for its valorisation as an alternative natural material for heavy metals removal from wastewater for further reuse as treated water in different applications. The study was conducted to investigate the introduction of Al-bearing sludge composition. The physical and chemical properties were examined using X-ray diffraction tests (XRD), scanning electron microscope tests (SEM), Fourier-transform infrared tests (FTIR), and Brunauer-Emmett-Teller tests (BET). Furthermore, the heavy metal concentrations of synthetic wastewater were measured using the spectrophotometry method. The experimental procedure is based on testing different pH limits and amounts of aluminum sludge to find the optimum conditions for copper (Cu) and zinc (Zn) removal. The results demonstrated a high removal efficiency where its value reached up to 97.4% and 96.6% for Zn and Cu, respectively, in an acidic medium (pH = 6) using a relatively high amount of sludge (1400 mg). Nevertheless, a low efficiency was obtained in the strongly acidic medium (pH = 4) and a smaller sludge amount of about 480 mg.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
