Abstract
Soft open points (SOPs) can transfer active power between feeders and compensate reactive power. These features help increase the integration capacity of distributed generation (DG), but the installation location and capacity of SOPs will affect DG planning. In addition, the distribution networks are usually unbalanced due to asymmetric line parameters, unbalanced loads, and DG. Converter-based DG units and SOPs have individual phase active and reactive power regulating ability and provide unbalance compensation. The objective of this paper is to develop a coordinated planning model of converter-based DG units and SOPs in an unbalanced distribution network (UDN) to incorporate their individual phase power control abilities. The individual phase power control characteristics of DG converters and SOPs are first analyzed. A bi-level optimization model of converter-based DG units and SOP planning is then established, in which the upper-level problem minimizes the total cost of the UDN and the lower-level problem minimizes the power loss and voltage unbalance. The bi-level model is transformed into a single-level mixed integer second-order cone programming problem that can be efficiently solved by widely used commercial solvers. Finally, the proposed model is verified on IEEE 33-node and Taiwan Power Company systems.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
