Cooperative roles of twinning, transformation and strain partitioning on the excellent cryogenic strength-toughness synergy of dual-heterogeneous metastable high entropy alloys

Abstract

In a metastable Fe50Mn30Co10Cr10 high entropy alloy (HEA), a dual-heterogeneous structure, encompassing both grain size and dislocation heterogeneity, has been constructed to obtain excellent cryogenic mechanical performance by varying the annealing temperature (630 and 740 °C) following severe deformation. The HS-630 sample, consisting of recovered coarse-grains (CG), recrystallized fine-grains (FGs) and un-recrystallized ultrafine-grains (UFGs), possesses higher yield strength (YS) of ∼965 MPa, ultimate tensile strength (UTS) of ∼1680 MPa and uniform elongation (UEL) of ∼45 % when compared to the fully-recrystallized HS-740 sample at liquid nitrogen temperature (LNT). The difference in YS is primarily caused by the grain boundary and dislocation strengthening of UFGs, whereas the higher ductility of the HS-630 sample is associated with the hierarchical activation of transformation- and twinning-induced plasticity (TRIP and TWIP) effects, and compatible strain partitioning between heterogeneous domains. The dual-heterogeneity results in different critical stresses of ε-phase nucleation in heterogeneous domains, and promotes sustainable TRIP effect in CGs and the emergence of TWIP effect in UFGs with strain progressing. Moreover, the strain of the ductile transformed ε-phase is mainly accommodated by non-basal slip, which contributes to the strain hardening in the later deformation stage. Furthermore, the higher cryogenic impact toughness of the HS-630 sample can be attributed to the synergistic effects of the fracture mode, the transformation characteristics, and the heterogeneous strain partitioning.