Abstract
This research study investigated the cooling performance of a minichannel heat sink that employed suspensions of microencapsulated phase change material (MEPCM) particles as the working fluid. The heat sink made from copper consisted of 10 rectangular minichannels, with a length of 50mm, depth of 1.5mm and a width of 1mm. A uniform heat flux was used for heating the mini channel heat sink and the Reynolds numbers were in the range of 133–1515. The concentration of the MEPCM particles scattered in the water varied from 0 to 10wt%. The experimental data showed that the wall temperature highly relied upon the Reynolds number and the increment of Reynolds number lead to the reduction of wall temperature for the coolant with or without MEPCM suspension in the minichannel heat sink. Moreover, the wall temperature got reduced for a coolant with MEPCM, compared to that without MEPCM especially at lower Reynolds numbers. Interestingly, the measured results revealed that the coolant with MEPCM particles was effective in cost performance than the pure coolant. The best cooling performance compared to that of pure water was observed for 2% MEPCM concentration within the considered range of flow rates.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
