Abstract

In this work, a two-step electrodeposition strategy is developed for the synthesis of core-shell Co3O4@CoS nanosheet arrays on carbon cloth (CC) for supercapacitor applications. Porous Co3O4 nanosheet arrays are first directly grown on CC by electrodeposition, followed by the coating of a thin layer of CoS on the surface of Co3O4 nanosheets via the secondary electrodeposition. The morphology control of the ternary composites can be easily achieved by altering the number of cyclic voltammetry (CV) cycles of CoS deposition. Electrochemical performance of the composite electrodes was evaluated by cyclic voltammetry, galvanostatic charge–discharge and electrochemical impedance spectroscopy techniques. The results demonstrate that the Co3O4@CoS/CC with 4 CV cycles of CoS deposition possesses the largest specific capacitance 887.5 F·g−1 at a scan rate of 10 mV·s−1 (764.2 F·g−1 at a current density of 1.0 A·g−1), and excellent cycling stability (78.1% capacitance retention) at high current density of 5.0 A·g−1 after 5000 cycles. The porous nanostructures on CC not only provide large accessible surface area for fast ions diffusion, electron transport and efficient utilization of active CoS and Co3O4, but also reduce the internal resistance of electrodes, which leads to superior electrochemical performance of Co3O4@CoS/CC composite at 4 cycles of CoS deposition.

Highlights

  • Today, the rapidly growing global economy has caused serious energy and environmental problems which significantly influence the development and progress of human society

  • CoS deposition on the capacitive performance of the ternary to investigate the effect of deposition on the capacitive performance of the ternary composite, composite, Co3O4@CoS/carbon cloth (CC) composites synthesized with different electrodeposition cycles were

  • A facile two-step electrodeposition process has been developed for the rational design and fabrication of Co3O4@CoS core-shell nanostructures on CC for high-performance supercapacitor applications

Read more

Summary

Introduction

The rapidly growing global economy has caused serious energy and environmental problems which significantly influence the development and progress of human society. Fast electron/ion transfer, rich accessible electroactive sites, and easy diffusion of electrolyte might be simultaneously obtained to maximize the electrochemical performance of electrodes [27,28] In this regard, few studies [29] are available on the fabrication and electrochemical properties of Co3 O4 @CoS core-shell nanoplate heterostructures. We develop a two-step electrodeposition approach to construct a 3D Co3 O4 @CoS core-shell nanosheet arrays grown on CC as a binder-free electrode for high-performance supercapacitor. The morphologies control of Co3 O4 @CoS/CC and relationship between the electrode structure and electrochemical properties are discussed in detail

Experimental
Materials Characterization
Electrochemical Measurements
The electrochemical spectroscopy were tested in the frequency
Morphology and Structural Characterization
Schematic
O4 nanosheets length of 400–500 nm and a thickness of less thanthan
Electrochemical Properties
O4 and
Specific capacitance curves
Conclusions
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.