Conversion of waste cork to N-doped porous carbons by urea-assisted hydrothermal method for enhanced VOC capture

Abstract

Converting waste resources into porous carbon for pollutants capture is an effective strategy to achieve the environmental goal of “treating waste with waste”. Cork is an ideal precursor of porous carbons due to its ordered honeycomb-like cell structure and layered composition distribution. Herein, N-doped porous carbons (PCs) were prepared via two steps of urea-assisted hydrothermal carbonization and chemical activation to mitigate volatile organic compounds (VOCs) pollution. Results indicated that the obtained PC4-800 exhibited remarkable features for adsorption including high total pore volume (0.97 cm3/g) and specific surface area (1864.89 m2/g), as well as abundant N-containing functional groups. The excellent pore structure was primarily owing to the corrosion of the carbon matrix by the gas produced from the reaction of K2CO3 and N-containing functional groups. The adsorption results showed that the PC4-800 have an outstanding toluene adsorption capacity (867.03 mg/g) that outperforming majority of adsorbents previously reported. There are substantial pores in N-doped PCs with a pore width of 1.71–2.28 nm, which is 3 to 4 times the molecular dynamic diameter of toluene, and plays a crucial role in the absorption process. Moreover, the promotional influence of N-functional groups on the toluene adsorption process was verified through DFT calculation by Gaussian imitating, where N-6 generated π-electron enrichment sites on the surface of N-doped PCs, facilitating π-π dispersion with the benzene ring in toluene. This study provides a new strategy to convert waste cork into high-performance adsorbents for VOCs removal.