Abstract
Investigated the extent of adsorption removal of calcium carbonate pigments - products of conversion of the reducing substances in different conditions of the preceding limestone processing flow. Also carried out experiments on the influence of the conditions of conversion of the reducing substances in the process of lime treatment on the filtration characteristics of the solutions after the first carbonation. As the criterion was accepted the value of the filtration coefficient. Found that by subjecting the conversion of reducing substances in the process managed lime processing, it is necessary in the course of the subsequent carbonization to ensure maximum adsorption of the formed secondary products – it is possible to achieve a satisfactory filtration of the investigated solutions. It is shown that the largest absolute removal of the dyes obtained after high temperature lime treatment, however, the composition of the products of disintegration to a greater extent accumulate high molecular weight compounds which deteriorate the filtration performance of solutions. In the solutions after the combination of the lime treatment in the process of carbonization is achieved the maximum effect of adsorption with the minimum remaining shares of conversion products, including high-molecular substances, which favorably affect the parameters of the filtering. The combination possibilities of the model of purification of diffusion juice with warm-hot lime treatment is limited to receive the filtered juice in the processing of raw materials with a purity of beet juice 82 % or less, you need to enter a 3.5% Cao, which is unacceptable. To ensure sustainable results of the adsorption of conversion products reducing substances and satisfactory filtering carbonated solutions are to intensify the processes of combined lime processing diffusion juice at the optimum distribution of the reagent.
Highlights
The paper presents a method for synthesizing of mathematical model of the process
Implementation of the model was performed in structural modeling environment MathWorks SimulinkTM
This milk was subjected to homogenization at different pressures
Summary
Также проведены опыты по влиянию условий конверсии редуцирующих веществ в процессе известковой обработки на фильтрационные показатели растворов после первой карбонизации. Установлено, что, подвергая конверсии редуцирующих веществ в процессе управляемой известковой обработки, необходимо в процессе последующей карбонизации обеспечивать максимальную адсорбцию образующихся вторичных продуктов – этим можно достичь удовлетворительного фильтрования исследуемых растворов. Что наибольшее абсолютное удаление красящих веществ получено после высокотемпературной известковой обработки, однако при этом в составе продуктов распада в большей степени накапливаются высокомолекулярные соединения, ухудшающие фильтрационные показатели растворов. В растворах после комбинированной известковой обработки в процессе карбонизации достигается максимальный эффект адсорбции с минимальными остаточными долями продуктов конверсии, в том числе и высокомолекулярные вещества, что благоприятно сказывается на показателях фильтрования. Для обеспечения устойчивых результатов адсорбции продуктов конверсии редуцирующих веществ и удовлетворительного фильтрования карбонизированных растворов необходимо интенсифицировать процессы комбинированной известковой обработки диффузионного сока при оптимальном распределении реагента. Ключевые слова: сахарное производство, известкования обработка, редуцирующие вещества, адсорбция, конверсия, фильтрование
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have