Abstract
On the basis of experiments in the Chalmers 100 kWth oxy-fuel test facility, this study presents an analysis of sulfur chemistry of pulverized lignite combustion, comparing oxy-fuel and air-fired conditions. Four test cases were investigated: an air-fired case, two oxy-fuel cases with dry recycling (30 and 35 vol % O2), and one oxy-fuel case with wet recycling (43 vol % O2 on a dry basis). The amounts of sulfur in the flue-gas, ashes, and condensed water from the condenser were quantified, and a sulfur mass balance was established. The composition of the ashes and the ash-forming matter in the fuel was analyzed. The ashes were investigated by X-ray diffraction, while the size of fuel and ash particles was determined by laser diffraction. In general, the results show that the lignite has a high sulfur self-retention by ash, especially in oxy-fuel combustion. The experiments also show that the conversion of fuel S to SO2 from oxy-fuel combustion is around 35% lower compared to air-fired conditions, whereas ...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
