Abstract

Development of optical materials has attracted strong attention from scientists across the world to obtain low band gap energy and become active in field of solar energy. This challenge, which cannot be accomplished by the usual techniques, has overcome through the current study using non-conventional techniques. This study has used explosive reactions to convert non-optical alumina to series of new optical nanocomposites with very low band gap energy for the first time. In this trend, alumina nanoparticles were prepared and modified by explosive reactions using ammonium nitrate as a solid fuel. By using methanol or ethanol as a source of carbon species, three nanocomposites were produced indicating a gradual reduction of the band gap energy of alumina from 4.34 eV to 1.60 eV. These nanocomposites were obtained by modifying alumina via two different carbon species; core-shell structure and carbon nanotubes. This modification led to sharp reduction for the band gap energy to become very sensitive in sunlight. Therefore, these nanocomposites caused fast decolorization and mineralization of green dyes after illuminating in sunlight for ten minutes. Finally, it can be concluded that reduction of the band gap energy introduces new optical materials for developing optical nano-devices and solar cells.

Highlights

  • Alumina considers one of the most familiar advanced materials in the field of structural engineering materials [1]

  • The band gap energy of the alumina nanoparticles decreased to lower values because of the existence of defect states located in the band gap region [2,3,4,5,6]

  • Nano alumina could be a good candidate for this purpose because the alumina nanoparticles showed some optical properties not found in its bulk phase

Read more

Summary

Introduction

Alumina considers one of the most familiar advanced materials in the field of structural engineering materials [1]. Bulk alumina is different from its nanoparticles because it has wide band gap energy in the range of 8.7–9.4 eV. The band gap energy of the alumina nanoparticles decreased to lower values because of the existence of defect states located in the band gap region [2,3,4,5,6]. To produce highly optical properties with unique surface texture, many attempts have used to develop the structures of semiconductor materials. Nano alumina could be a good candidate for this purpose because the alumina nanoparticles showed some optical properties not found in its bulk phase

Methods
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call