Abstract
Ignition of solid fuel by a hot oxidizing flow in a sudden-expansion combustor was investigated experimentally. The controlled variables of the experiments were concentration of oxygen (12-25%), gas temperature (750-850 C), and flow velocity (19-46 m/s). The step height was 29 mm. The corresponding Reynolds numbers based on the flow velocity and the step heights were 12 x 10(sup 4)-31 x 10(sup 4). The controlling mechanisms of ignition in the flow with abundant oxygen were distinct from those with little oxygen. The initial flame kernels formed near the reattachment point and adjacent to the surface of solid fuel when the oxygen concentration was large. The process was controlled by diffusion and the ignition delay decreased with increased flow velocity. For the flow containing oxygen at a small concentration, the initial flame kernels formed within the recirculation zone and away from the surface of the solid fuel. The process was then controlled by the chemical kinetics and the ignition delay increased with increased flow velocity. 15 refs.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
