Abstract
The polycarbonate (PC)/polymethyl methacrylate (PMMA) (10/90) blends with microcellular foams were prepared by the two-step process using supercritical carbon dioxide as physical foaming agent. The effects of saturation temperature, saturation pressure, foaming temperature, and foaming time on the cell morphology structure were investigated by scanning electron microscopy. The results indicated that the mean diameter of cells in foamed PC/PMMA films decreased with the increment of saturation temperature and saturation pressure but increased with the increment of the foaming time. Moreover, the mean diameter of cells decreased first, but then increased with the increment of the foaming temperature. The cell density ( Nc) increased with the increment of saturation temperature and saturation pressure but decreased with the increment of the foaming time. However, the Nc increased first but then decreased with the increment of the foaming temperature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.