Abstract
Cu(In,Ga)Se2 (CIGS) absorbers with several Ga/III, Ga/(In+Ga) ratio, profiles were deposited by the so-called “multi layer precursor method” consisting of Ga-Se/In-Se/Cu-Se stacks. The effects of average Ga/III ratios and back slopes of the Ga/III profiles on the photovoltaic performance were investigated. The optimum average Ga/III ratio of approximately 0.36 leads to the appropriate average band-gap energy as well as sufficiently long carrier lifetime in CIGS absorber, thus enhancing open-circuit voltage. In addition, the back slope of 0.50μm−1, defined as the ratio of the change in Ga/III ratio to the change in the depth range from 1 to 2μm from CIGS surface, induces back surface field of 0.34V/μm, thereby increasing short-circuit current density. Ultimately, the CIGS absorber on flexible stainless steel substrate with the double graded Ga/III profile (the average Ga/III of 0.36 and the back slope of 0.50μm−1) was fabricated by the multi layer precursor method. This results in the 14.36%-efficient CIGS solar cell on the flexible substrate without an anti-reflective layer.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
