Control System Design for Feeding Machine of Sound Absorption Board Production Line

Yanjun Xiao,Rui Liu,He Zhang,Yongcong Li,Yuxiang Liu

doi:10.2174/1874155x01509010388

Abstract

This paper introduces a kind of mechanical structure and its control system, with which granular materials can be put into mould with a higher leveling status, the mechanical structure adopts split type arrangement, its function is to achieve the material removal and scraping, its control system is composed of a plurality of Mitsubishi PLC using masterslave control method. The mechanism and control methods can be widely applied in automatic production lines, which needs granular material into the mould quantitatively and passively wiped flatly.

Highlights

I Perlite sound absorption board has these features as list: sound-absorbing, absorb the moisture, fire safety, anti-static, T lightweight, environmental friendly etc, in line with the development trend of decorating material with lightweight
When the automatic production line works, four layers of perlite powder are required at the bottom, middle, upper and surface of the mold, and in the
C system is the core of the whole process, so this paper focuses on the feeding machine's control system

Summary

INTRODUCTION

I Perlite sound absorption board has these features as list: sound-absorbing, absorb the moisture, fire safety, anti-static,. T that smooth the material evenly for the perlite products such as sound-absorbing board, this system is suitable for Eother small diameter solid particles that need to be strickled with relatively high flatness (for the process). PLS is the pulse signal receiving end of the driver, this port is connected with Y00 of PLC, Y14 and Y15 are respectively used for direction of motor control and axle control; the 2M530 driver is matched with the 2S86Q-069B8, the working voltage is DC24V, because of the need of torque is small when STRICKING ROD working, so use this type of stepping motor driver, compared with 2M2280N, 2M530 does not have alarm output function, the function and usage of the other terminals are the same with 2M2280N, the connection method as shown in Fig. Calculating power and current of each device, besides, selecting suitable wires and connecting according to the electric principle diagram

Designing the Software of Control System

CONCLUSION

A Received