Abstract
This paper presents a new humanoid robot control structure - Man-Function humanoid robot. The sensing devices worn on the human body, these devices will produce signals of joints’ change when people move. Computer of the control system receiving the signals and processing them, then issue control signals to the servos of the robot at the same time, control the robot’s behavior. For this reason, a control structure of human’s behavior to determine the robot’s behavior formed. The humanoid robot has 17 servos and two pressure sensors, the rotation of these servos’ steering gears lead to the robot’s behavior changes, and 12 servos corresponding to the human body sensing devices, other 5 servos used for the stability control of the robot combined with the pressure sensors. Based on this control structure, some pilot tests of the sensing device or servo have been done, the closed-loop position control mode has been chosen and the Kalman filter smoothing optimization method been used, the initial static walking control of the robot been realized. DOI: http://dx.doi.org/10.11591/telkomnika.v11i12.3891
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Research Journal of Applied Sciences, Engineering and Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
