Control Strategy to Maximize Power Extraction in Wind Turbine

Abstract

ABSTRACTThis article deals with nonlinear control of variable speed wind turbine (VSWT), where the dynamics of the wind turbine (WT) is obtained from a single mass model. The main objective of this work is to maximize the energy capture form the wind with reduced oscillation on the drive train. The generator torque is considered as the control input to the WT. In general the conventional control techniques such as Aerodynamic Torque Feed-Forward (ATF) and Indirect Speed Control (ISC) are unable to track the dynamic aspect of the WT. To overcome the above drawbacks the nonlinear controllers such Sliding Mode Controller (SMC) and SMC with integral action (ISMC) with the estimation of effective wind speed are proposed. The Modified Newton Raphson (MNR) is used to estimate the effective wind speed from aero dynamic torque and rotor speed. The proposed controller is tested with different wind profiles with the presence of disturbances and model uncertainty. From the results the proposed controller was found to...