Abstract
AbstractIn this study, with data obtained from a particleboard factory, screw withdrawal strength (SWS) values of particleboards were estimated using artificial neural networks (ANNs). Predictive control charts were also created. A total of seven independent variables were used for the ANN model: modulus of elasticity (MoE), surface soundness (SS), internal bond strength (IBS), density, press time, press temperature, and press pressure. The results showed that the ANN-based individual moving range (I-MR) and cumulative sum (CUSUM) control charts created for SWS values detected out-of-control signal points close to those of the real-time control charts. Among the selected independent variables, IBS was the most important parameter affecting SWS. The most suitable press temperatures and times for high SWS values were determined as 198–201 °C and 165–175 s, respectively. Moreover, the boards with 2500–2800 N/mm2 MoE and 0.55 N/mm2 IBS values exhibited the best SWS.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
