Control of Corrosion-Induced Damage in Reinforced Concrete Beams Using Carbon Fiber-Reinforced Polymer Laminates

Abstract

This paper presents the results of an experimental study conducted to investigate the effect of carbon fiber-reinforced polymer (CFRP) confinement on the cracking damage induced by impressed current-accelerated corrosion of reinforced concrete beams. The beams were 254mm deep by 152mm wide by 3,200mm long. Two different corrosion configurations, namely uniform and shear-span corrosion, were investigated in eight specimens at three different degrees of corrosion (5, 10, and 15% theoretical mass loss). Uniform corrosion along the whole length of the beams (3,000mm) and shear-span corrosion (900mm from each beam end) were considered. The different degrees of corrosion were induced using an accelerated corrosion technique with an impressed current. Based on the results, it was concluded that CFRP laminate confinement reduces corrosion expansion by up to 70% and slows the rate of corrosion through decreasing the corrosion mass loss by up to 35%.