Abstract

Spark ignition–controlled auto-ignition hybrid combustion, also known as spark assisted compression ignition, is of considerable interest in gasoline engines because of its potential to enlarge the operating range of gasoline diluted combustion. However, it was found that the spark ignition–controlled auto-ignition hybrid combustion process was often characterized with large cycle-to-cycle variations. In this research, a new approach by combining the traditional second-order derivative method and Wiebe function fitting method was proposed to identify different heat release stages of spark ignition–controlled auto-ignition hybrid combustion. The heat release characteristics of the spark ignition–controlled auto-ignition hybrid combustion based on stratified flame ignition strategy and its control methods were investigated in detail. The effect of control parameters, including spark timing, direct injection ratio and dilution strategy, on improving the thermal efficiency and decreasing the variation of heat release trace in spark ignition–controlled auto-ignition hybrid combustion based on stratified flame ignition strategy was analysed. The advance of flame propagation ending point and the increase in the average heat release rate in flame propagation stage benefitted the fuel economy and reduced the variations of heat release in spark ignition–controlled auto-ignition hybrid combustion. Although the increase in direct injection ratio contributed to the stability of heat release in the spark ignition–controlled auto-ignition hybrid combustion based on the stratified flame ignition strategy, the thermal efficiency of spark ignition–controlled auto-ignition hybrid combustion cannot be effectively optimized due to the decrease in combustion efficiency. The application of exhaust gas recirculation and air dilution could decrease the variations of heat release process and increase the thermal efficiency of spark ignition–controlled auto-ignition hybrid combustion based on stratified flame ignition strategy.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call