Abstract
This paper investigates on the contribution of hemicelluloses, cellulose, and lignin to the carbon mass and the textural properties of activated carbons produced from lignocellulosic precursors by phosphoric acid activation. Four raw materials (olive pomace, miscanthus, tomato plants, and poplar wood) were tested. Nitrogen adsorption-desorption at 77 K was used to determine the porous properties of chars and activated carbons produced from the biomass residues studied. A predictive calculation, based on the biochemical composition of the raw materials, was studied to evaluate the heat treatment yields without and with the activating agent and the respective contributions of hemicelluloses, cellulose, and lignin to the chars and to the subsequent activated carbons of various precursors in terms of carbon weight fraction. The results of this calculation were compared with the experimental ones. This study shows that the contribution (in carbon mass %) of hemicellulose, cellulose, and lignin in the final activated carbons after a phosphoric acid activation is very close to the biochemical composition of the lignocellulosic precursor. It was also found that lignin is responsible for the microporous domain in the activated carbon in contrast with hemicelluloses and cellulose which are responsible for the formation of the mesoporous domain.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.