Contribution to X-ray analysis of carbo-nitrided steel layers

Abstract

The non-destructive X-ray diffraction method is used to analyse carbo-nitrided steel layers after wear testing. These measurements are carried out on the two major phases of the material,i.e.the martensite and the retained austenite. Such measurements are particularly difficult for three reasons. First, strong gradients exist across the wear track. Second, the diffraction peaks obtained for the martensite are broadened, as a result of the overlap of different reflections of the tetragonal structure. Third, the studied material is multiphase. Its major phases are martensite and austenite, but it also contains carbide and nitride clusters, which lead to incoherent scattering of X-rays. A new quantitative phase analysis method is thus proposed to define the volume fractions of these different constituents of the material. This method accounts for the evolution of the background level during wear. A micro-mechanical model is then developed to process the diffraction peak positions obtained for the martensite and the retained austenite. This model defines the `true' stress and carbon content of both phases. It also allows separation of the reflections of the martensite. The true widths of the diffraction peaks, which characterize the plastic deformation, can thus be quantified. Results for wear-test specimens show a strong plastic deformation of the retained austenite during contact fatigue. This leads to a partial transformation of this phase into martensite. In the martensite, on the contrary, the plastic deformation remains low but the carbon content decreases. This is caused by a stress-induced precipitation of carbides.