Contribution of silane modification of halloysite nanotube to its poly (butylene terephthalate)-based nanocomposites: structural, mechanical and thermal properties

Abstract

Polybutylene terephthalate (PBT) nanocomposites were melt-blended with two types of Turkish halloysite nanotubes (HN). Naturally occurring HN samples were used to produce PBT-based composites at the HN compositions of 1%, 3%, 5%, and 10%. Findings of neat and silane-coated HN-containing composite samples were compared to investigate the interfacial adhesion between polymer matrix and reinforcement material. According to test results, a 1% amount of HN was found to be the most suitable option in the case of mechanical and thermal properties of composites. Additionally, silane-modified grade displayed highly indicative improvements compared to pristine HN clay due to better interfacial adhesion of halloysite nanotubes to the PBT matrix was accomplished. Property enhancements achieved for composite samples containing low contents of HN were confirmed by morphological examinations. As a result, the PBT/ 1% HN-S composite sample was bookmarked as the most suitable option to fabricate HN-reinforced PBT-based nanocomposites in terms of mechanical, thermo-mechanical, morphological, thermal, and physical performances based on the findings in this study. Silane-modified halloysite grades exhibited better results, and they were found to be more suitable in the case of applications of PBT.Graphical abstract