Abstract
AbstractA quantitative dynamic solder wettability mesurement technique was utilized to evaluate the effects of reflow processing on the wettability parameters associated with solder ball alloys. This technique enables the examination of the final degree of solder wetting and the continuous monitoring of wetting as a function of time during the reflow process under nitrogen atmosphere. An experimental design approach employing a 24 full factorial experiment was formulated to illustrate the use of this measurement technique investigating the final result of wetting. Solder wettability was determined with respect to the contact angle, base diameter and height of the reflowed solder ball alloy. The most significant effect estimates with respect to contact angle were solder flux and pad metallization. Solder ball alloy was found to significantly impact the base diameter and height of the reflowed solder. The effect of solder flux activators and pad metallizations on the subsequent continuous solder wettability wetting rates and amount of molten solder spread of solder ball alloys during reflow were measured. Reflow with a relatively more activated solder flux material was found to enhance the rate of solder wetting of the the pad metallization.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
