Continuous Tunable Optical Detectors with a-Si:H Bias Sensitive Photodiodes

Abstract

ABSTRACTToday’s image-based systems in civil security rely on sensors based either on CMOS or CCD technology, and they do not analyze color with sufficient equivalence to the human eye. The main reason for this is that the function of the fundamental color matching curves of the cones in the human eye can hardly be reproduced by technical systems [1]. Common color sensors are optimized for the three-area method in accordance with the standard DIN 5033-6. In civil security applications, for example, color sensors are used to identify the potential danger of whitish powder samples. Colorimetric classification based on the three-area method only provides suboptimal results [2], but not an unequivocal optical description. A series of tests performed at the IMT with more than 30 types of whitish powder samples were carried out with a spectrophotometer. These measurements showed that specimens with similar or different chemical compositions cannot be distinguished by the human eye, using the three-area method, exhibit characteristic differences in the CIE-L*a*b* measurement system under spectral method conditions. Until now, the realization of the spectral method on chip has been impossible with common color sensors. In this paper, we present a-Si:H-based bias-sensitive ni3p photodiodes, which have been fabricated successfully in a low temperature PECVD process. Present research focuses on the optimization of the continuous tunability of a-Si:H multispectral photodiodes, to increase the number of spectral stimulus specifications.