Continuous synthesis of zinc oxide nanoparticles in a microfluidic system for photovoltaic application

Abstract

This study describes the synthesis of zinc oxide nanoparticles (ZnO NPs) using a microfluidic system. A continuous and efficient synthetic process was developed based on a microfluidic reactor in which was implemented a time pulsed mixing method that had been optimized using numerical simulations and experimental methods. Numerical simulations revealed that efficient mixing conditions could be obtained over the frequency range 5-15 Hz. This system used ethanol solutions containing 30 mM sodium hydroxide (NaOH) or 10 mM dehydrated zinc acetate (Zn(OAc)2) under 5 Hz pulsed conditions, which provided the optimal mixing performance conditions. The ZnO NPs prepared using the microfluidic synthetic system or batch-processed system were validated by several analytical methods, including transmission electron microscopy (TEM), energy dispersive X-ray spectrometry (EDS), X-ray diffraction (XRD), UV/VIS NIR and zeta (ζ) potential analysis. Bulk-heterojunction organic photovoltaic cells were fabricated with the synthesized ZnO NPs to investigate the practicability and compared with batch-process synthesized ZnO NPs. The results showed that microfluidic synthesized ZnO NPs had good preservability and stability in working solution and the synthetic microfluidic system provided a low-cost, environmentally friendly approach to the continuous production of ZnO NPs.