Abstract
Various Ni-based catalysts were tested in the continuous liquid phase hydrogenation of levulinic acid (LA) to γ-valerolactone (GVL) in a trickle-bed reactor using water as solvent with the aim to develop an economic and environmentally friendly way for the GVL synthesis. For this purpose, various synthesis methods were used to prepare Ni-based catalysts, which were first screened in batch reactors. Characterization by X-ray diffraction, temperature-programmed reduction, electron microscopy, hydrogen chemisorption, and X-ray absorption spectroscopy showed that slow precipitation using urea resulted in a good Ni dispersion. The dispersion also improved at lower Ni loading, and smaller Ni particles mostly showed an enhanced catalytic performance for the synthesis of GVL. 5 wt % Ni/Al2O3 prepared by wet impregnation showed the highest specific activity for the hydrogenation of LA to GVL (90% LA conversion and 75% GVL yield) featuring an average Ni particle size of 6 nm. Some deactivation of the catalysts was ...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.