Continuous surface and air decontamination technologies: Current concepts and controversies

Abstract

Effective and safe continuous surface and air decontamination technologies could be a useful adjunct to routine cleaning and disinfection in health care settings. Continuously active quaternary ammonium disinfectants that provide residual antimicrobial activity on undisturbed surfaces for up to 24.ßhours have been shown to reduce the recovery of clinically important pathogens in some but not all real-world studies. Although quaternary ammonium-based supplemental coatings have been reported to provide prolonged residual efficacy in patient care settings, there is concern that some of these products may be removed by routine cleaning and disinfection. To address this concern, the Environmental Protection Agency has recently issued updated guidance requiring demonstration of efficacy after multiple abrasion and chemical exposures for registration of supplemental residual antimicrobial coatings. Far-ultraviolet-C and direct irradiation below exposure limits are promising technologies for continuous air and surface decontamination in occupied spaces, but additional studies are needed to evaluate their long-term safety and efficacy. Given the increasing use of electronic air cleaning technologies in community and health care settings, there is a need for studies to assess real-world efficacy and safety.