Abstract
A slug flow crystallizer for cooling crystallization with focus on enhanced product quality control in terms of narrow particle size distribution (PSD) was designed and characterized. Emphasis was put on slug flow stability while maintaining a convex shape of slugs to make use of the advantage of a narrow residence time distribution. Measurements of the latter one showed plug-flow-like behavior for the liquid and solid phase independent of the operating conditions within the range investigated. A tube-in-tube temperature concept led to smooth cooling from 50 to 31°C avoiding supersaturation peaks. Seeded cooling crystallization of aqueous l-alanine solution successfully led to reproducible product PSDs avoiding secondary nucleation. Thereby the crystals’ median diameter was increased by 240μm. Within a residence time of 10.5min only, a relative process yield of approximately 83% was achieved. To identify optimized operating conditions for narrow PSD and reduced agglomeration, the effect of total volume flow rate, slug length, and cooling rate on the PSD and agglomeration degree was quantified. A high flow rate (40mLmin−1) and a high cooling rate (3.6Kmin−1) reduced agglomeration to its minimum and shifted the size distribution of single crystals without its broadening by in average 90μm.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
