Abstract

Continuous powder processes, such as continuous powder mixing, are more than ever envisioned as a viable alternative to batch equipment, in various industries such as pharmaceuticals, specialty chemicals (zeolites, SiC), bio-renewables or food. In the present work we have implemented an on-line image analysis set-up that is able to capture all the images of the particles at the outlet of a continuous pilot-scale mixer. This allows the determination of the homogeneity of mixtures of two different compositions, as well as the analysis of their evolution during steady-state and transitory regimes. The importance of a proper definition of the scale of scrutiny of the mixture is emphasized by providing homogeneity results obtained at four different scales. Evidence of segregation by percolation giving rise to the enrichment of the mixer's bed with fine particles is given and commented. The impact of the stirrer's rotational speed on the quality of the mixtures, as provided by the coefficient of variation CV, is reported. Up to 20Hz, CV's are extremely high, while above 30Hz, the influence of the impeller speed is much weaker. Finally, the influence of impeller speed's step perturbations is measured and commented. Due to the size – segregation phenomenon inside the mixer, negative steps are deeply detrimental to the mixing process. On the contrary, positive steps can be absorbed by the equipment without degradation of the quality of the mixtures.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.