Abstract
In case of depositing multi-Layer thin-film circuits, it is preferable to construct the whole circuit in one evacuation cycle. For this purpose, an evaporator has been designed with many special faculties, which conventional deposition aparatus is not equipped with. This article describes the construction and the evacuation data of this trial product. Principal functions are as follows : (1) 15 deposition masks are housed in the deposition chamber, and any given mask can be placed under the substrate.(2) Mutual positions between the substrate and the deposition mask are regulated with the accuracy of 10μ.(3) Faculties are provided for selecting one evaporation source out of 6, monitoring the depcsition rate in the range of 10500Å/sec, and measuring the film thickness in the range of 0.15μ.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.